Do-it-Yourself Lotería Ornaments

Do-it-yourself Mexican Bingo Lotería Ornaments

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

Each year we decorate the tree and each year I’m not content with the ornaments I have to choose from or the ones available at the store. None of the ornaments are quite what I’m looking for which means I end up looking for unconventional ways to remedy the situation. One year I even ended up hanging capiruchos on the tree!

This year I decided I’ll make my own ornaments. Because the holiday season is so hectic, I wanted something that wouldn’t take too long, and because the budget is tight this time of year, I didn’t want it to be too expensive either. Here is the craft that resulted!

These Loteria ornaments took me about two hours from start to finish and cost about $15 if, like me, you have many of these items on hand already. I’m so happy with the way they came out. I can’t wait to decorate the tree. Here’s how you can make your own custom ornaments for yourself or as a gift. Will you make Loteria ornaments or something else? Other ideas: family photos, photos of your native country (if you live elsewhere) or, the covers of favorite books – the possibilities are endless!

Custom Handmade Ornaments

What you need:

Jigsaw, table saw or handsaw
Safety glasses
3/8 x 3 x 24″ pine craft board (two)
#216 – ½ x ½ in. zinc screw eyes, 10 pack (three)
Medium grit sandpaper
Ruler, yard stick, or measuring tape
Pencil
Scissors
Elmer’s Glue-All, general purpose adhesive
Small craft paint brush
White mason line (string)
A heavy book
Digital images you wish to make into ornaments (and a printer)
Card stock for your printer (not available at Lowe’s)

Directions:

1. Using a ruler and a pencil, draw a line on each of your boards every two inches.

2. Wearing safety glasses, use a jigsaw, table saw or handsaw to cut the board on each line so that you end up with 24 two inch blocks of wood. (I used the Rockwell BladeRunner sent to me by Rockwell. It cut through the wood like butter and was really comfortable to use right on the dinner table where I do most of my crafting. I think I see more projects involving wood cutting in my future!)

rockwell_bladerunner

3. Lightly sand the rough edges on each piece if necessary. Set aside. (Optional: You can paint the blocks of wood any color you like and allow to dry. I chose to leave mine natural.)

4. Print whichever images you wish to use on your ornaments on card stock. (Card stock is sturdier than regular copy/printer paper and will hold up to glue better.) Make sure that your images are small enough to fit on the face of the wood block. I kept mine around 1 ½ x 2 inches. I found Microsoft Word useful for this. I scanned the images into my computer and then opened them in Microsoft Word which has a built-in ruler across the top of the document.

5. Cut out the images with scissors.

6. Using a small paintbrush, brush glue on the back of each image, (working on one image/ornament at a time.) Position the image in the center of the block of wood and push down to adhere. Place a heavy book or other flat heavy object on top of the ornament for a minute to help the image to dry flat and adhere well. (Optional: If using specialty decoupage craft glue which advertises that it can be used for “sealing” as well as adhering, feel free to paint over top of the image to give it a finished glossy look and allow the ornament to air dry without any heavy object placed on top. Painting over top the image is not advised if using Elmer’s Glue-All.)

7. Once dry, twist a screw eye into the top side of each ornament. If your fingers become tired, needle-nose pliers will help you screw them into the wood. Tip: Sometimes a careful little tap with a hammer will help get the screw eyes securely into the wood before you attempt to turn/screw them in.

8. Cut the string, (I used white mason line because I like the simplicity of it, but you can use any color or type of string you like), into pieces about 4 inches long. (You will need 24 of them.)

9. Put each piece of string through the screw eye on each ornament and tie in a knot.

10. Your ornaments are ready to hang on your tree! Feliz Navidad!

How to make your own Lotería Ornaments

Make your own Mexican Bingo / Lotería ornaments

Want more creative ideas?

Winter Badge '13 280x200

 

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

4 thoughts on “Do-it-Yourself Lotería Ornaments

  1. So creative! I love this idea. We have la loteria game, but I got it several years ago and really never played it with my kids because I had to edit so many of the spaces…they weren’t ready for “el borracho”…among others. I also like the idea of using pictures…mine are always on the computer…but it would be cool to print out our favorites each year and see how they change.

  2. Pingback: Tattoos in Latin American Culture | Latinaish

Note: You are not required to sign in to leave a comment. Please feel free to leave the email and/or website fields blank for an easier commenting experience.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s