How to Paint a Portable Mural

how-to-paint-a-portable-mural-latinaish

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

I have loved murals for as long back as I can remember, and so it was only natural that one day I would want to move from an admirer of murals to a creator of murals. At 12 years old I asked my mother if I could paint a mural on my bedroom wall, and I will be forever thankful that she allowed me to, no questions asked.

Since growing up and moving out on my own, I have continued to paint murals on the walls in every place I’ve lived. The only sad thing about a mural is that you can’t take it with you when you move, and if you decide to re-paint a room, it often gets painted over, with no way to preserve it. So when I decided I wanted to paint a new small-scale mural this time, I decided to make it portable. (Which is actually something Mexican painter Diego Rivera did in a much larger scale!)

I chose murals in La Palma, El Salvador, in the traditional style created by Fernando Llort, for my inspiration. While this portable mural measures only 8 x 24 inches, I hope to do a bigger one later. Here’s how you can make one too!

How to: Paint a Portable Mural

You need:

1 untreated piece of wood board (whichever size you want. The one pictured is 8 x 24 inches) – Try to find one with as little defects and knots as possible.

Paint in various colors, (I love the Valspar samples at Lowe’s which are only a couple dollars each. They come in so many bright, beautiful shades.)

paint-samples

Paint brushes in various sizes

A pencil

A yardstick

A piece of drafting paper

Directions:

1. Measure the length and width of the wood. On the drafting paper, with one square equaling one inch, draw a rectangle to the same dimensions as your wood.

drawing-mural

(Note: If you’ll be hanging the mural instead of just setting it on a shelf or mantle, you will need to carefully add picture hangers to the back of the wood at this point – Just make sure the screws are much shorter than the depth of the wood so you don’t go through and damage the side you’ll be painting.)

2. Within this rectangle on the drafting paper, create your design with pencil.

3. Once you’re happy with your design, you’re going to manually transfer it to the piece of wood, using the grid on the drafting paper as a guide. Don’t feel overwhelmed – just go square by square and draw what you see. Use pencil so you can erase and correct as needed. As you transfer the design, you may feel comfortable changing some elements of it – go ahead! It doesn’t have to be exactly like your original draft.

squares-on-wood

4. Take a moment to plan ahead and decide which colors you want to use and where. This may change as you work, but it’s good to have a general idea before plunging in.

5. Start painting!

painting-the-mural

finished-mural

6. Allow the paint to dry. Once the paint is dry, you can put your mural wherever you want, and because it’s portable, if you change your mind – no problem! Just move it elsewhere!

mural-on-shelf

Want more creative ideas?

Spring 14 Blogger Badge_Summer rectangle

 

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

Do-it-Yourself Laptop Work Tray

D.I.Y. Fox Laptop Work Tray featuring Pantone 2014 color of the year

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

In this house, almost no one leaves their laptop at the desk. We may decide we want to be in the same room with the family, or that we want to sit somewhere more comfortable, or that when Carlos is watching “Chavito del 8″ on TV, it’s really freaking distracting and we need to move elsewhere, (and by “we” I mean “me.”)

The problem is that when you move your laptop around constantly, accidents can happen, and you’re much better off keeping it on a work tray which makes it easier to transport. Carlos gave me the idea to use a scrap of wood we had and just buy handles for it, but I realized it was the perfect project to show off the new 2014 Pantone Color of the Year, Radiant Orchid. And to go with the trendy color, I chose something else trendy to decorate the tray – a fox! Foxes have been super popular in everything from fashion to home décor to music this past year, and I think that trend will continue, (although, if anyone is taking nominations for 2014 animal of the year, I nominate chuchos aguacateros.)

Do-it-Yourself Laptop Work Tray

You need:

A piece of wood, about 10 inches wide, 22 inches long, and 3/4-inch thick
Paint: Pantone 2014 color of the year, Radiant Orchid (sample size is sufficient for this project)
Paint: Black (you can use any craft paint you may already have on hand)
paint brushes (1 medium household, 1 smaller craft brush)
screw driver, drill (I used my Rockwell 3RILL)
2 cabinet pulls with screws (I used Gatehouse 3-inch Matte Black Bar Cabinet Pulls)
FrogTape (painter’s tape)
printer, printer ink and card stock
a pack of 1-inch felt pads
scissors or X-Acto knife
pencil
measuring tape
newspapers

Directions:

1. Spread out newspaper to protect your surface from the paint. Paint the top and edges of the piece of wood using the Pantone 2014 color of the year, Radiant Orchid. When completely dry, flip over and paint the other side.

painted-board-color-of-the-year-pantone

2. While the paint dries, you’re going to print your stencil. Decide which design you’d like on your tray. If you like the fox, you can download the stencil I created from free clipart by clicking the image below and downloading. Print in landscape format on card stock. It’s important to use card stock and not regular copy paper since you’ll be using this as a stencil and it needs to be sturdy.

fox-stencil-download

3. Cut the shape of the fox out from the middle of the card stock then use the frog tape to tape the stencil to the middle of the board.

fox-stencil

4. “Pounce” (dab) the black paint onto the wood with a craft paint brush or foam brush especially for stenciling, being careful at the edges of the stencil. (No peeking!) Allow to dry completely before removing the tape and stencil.

5. Use the measuring tape to measure the wood and center the handles where you’d like them on each end of the tray on the top side. Use a pencil to outline where you’ll drill the holes.

drill-holes-fox-tray

6. Drill the holes and then attach the handles with the screws that came with them.

7. On the back side of the tray will be the four screw heads – these will scratch up surfaces so on each one, place a self-adhering felt pad.

8. Your tray is finished!

DIY fox laptop work tray - Latinaish.com

Want more creative ideas?

Winter14_BloggerBadge_200x200

 

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

Do-it-Yourself Love Song Pillow for Día de San Valentín

love-song-lyric-pillow-1

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

Text on pillows and other home décor is hot right now, but as someone who loves language and typography, it will always be in style at my house.

Here’s how you can make your own custom pillow featuring the lyrics of “your song” to gift to your valentine on Valentine’s Day. (I gave Carlos this pillow featuring lyrics from Ricardo Arjona’s “Te Encontraré” which is our song.)

Do-it-Yourself Love Song Pillow

You need:

4 x 5 ft. Blue Hawk canvas drop cloth, cut into two squares slightly larger than 19 x 19 in. each
(For cutting the drop cloth: pencil, ruler, scissors)
allen + roth 19 x 19 in. white square decorative pillow
1 clear, plastic, rectangular storage container with lid
LED lights with batteries
a large sewing needle (not available at Lowe’s)
size 10 crochet thread in desired color (not available at Lowe’s)
permanent marker
clear package tape
printer with ink and paper

Directions:

Before you begin: If you’re not fond of the scent of the drop cloth, you can launder it just as you do with your clothes in the washer and dryer with whichever detergent you have on hand.

1. Cut two squares of the drop cloth to slightly larger than 19 x 19 inches.

2. Choose a few lines of lyrics from your love song, and then print them in a large font of your choosing on a regular piece of white 8.5 x 11 inch printer paper. (You may find that this works best in “landscape” rather than “portrait.”)

3.. Build your lightbox: Put the lid of the storage container on the floor or table surface with the LED lights on top of it. Turn the LED lights on and place the storage container on top so that the LED lights are sealed inside and the storage container is upside down.

lightbox

4. On the bottom of the closed storage container, tape down the paper with your printed song lyrics, then position one square of the drop cloth fabric over the paper. You should be able to see the lyrics through the fabric. Make sure the lyrics are aligned as you like and then tape down the fabric. (You may be tempted to skip the taping part but if you want a neat result, I recommend doing it so nothing gets shifted while you work.)

5. Use a permanent marker to trace the letters through the fabric.

trace-letters

traced-letters-closeup

6. Remove the fabric from the “lightbox.” Optional: Lightly iron the fabric with a hot iron. This will help “set” the ink and help prevent it from bleeding later should it get wet or need washing.

7. Now, you have several options for sewing your pillow. The traditional way with a hidden seam would require a sewing machine to sew the two squares together, closing three sides, (with the traced letters flipped to the wrong side as you use the sewing machine.) You would then reach inside and turn the pillow case inside-out so now the text looks correct, stuff the pillow inside and sew the fourth side closed by hand using small stitches and a thread that matches the fabric color.

In my case, I can’t use a sewing machine to save my life and I wasn’t even going to attempt to hide my stitches. I decided to use my poor sewing skills to my benefit and make the stitches a visible part of the design. The crochet thread I chose was burgundy so it stood out nicely against the cream color of the drop cloth. The stitch I used is called a “blanket stitch” – Instructions can be found HERE, but here are step-by-step photos to help you.

blanket-stitch-howto

7. Once all four sides are stitched closed, your pillow is finished and ready for giving to your cariño!

love-song-text-pillow-2

Want more creative ideas?

Winter14_BloggerBadge_200x200

 

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

Do-it-Yourself Lotería Ornaments

TracyLopez_Latinaish_LoteriaOrnaments1

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

Each year we decorate the tree and each year I’m not content with the ornaments I have to choose from or the ones available at the store. None of the ornaments are quite what I’m looking for which means I end up looking for unconventional ways to remedy the situation. One year I even ended up hanging capiruchos on the tree!

This year I decided I’ll make my own ornaments. Because the holiday season is so hectic, I wanted something that wouldn’t take too long, and because the budget is tight this time of year, I didn’t want it to be too expensive either. Here is the craft that resulted!

These Loteria ornaments took me about two hours from start to finish and cost about $15 if, like me, you have many of these items on hand already. I’m so happy with the way they came out. I can’t wait to decorate the tree. Here’s how you can make your own custom ornaments for yourself or as a gift. Will you make Loteria ornaments or something else? Other ideas: family photos, photos of your native country (if you live elsewhere) or, the covers of favorite books – the possibilities are endless!

Custom Handmade Ornaments

What you need:

Jigsaw, table saw or handsaw
Safety glasses
3/8 x 3 x 24″ pine craft board (two)
#216 – ½ x ½ in. zinc screw eyes, 10 pack (three)
Medium grit sandpaper
Ruler, yard stick, or measuring tape
Pencil
Scissors
Elmer’s Glue-All, general purpose adhesive
Small craft paint brush
White mason line (string)
A heavy book
Digital images you wish to make into ornaments (and a printer)
Card stock for your printer (not available at Lowe’s)

Directions:

1. Using a ruler and a pencil, draw a line on each of your boards every two inches.

2. Wearing safety glasses, use a jigsaw, table saw or handsaw to cut the board on each line so that you end up with 24 two inch blocks of wood. (I used the Rockwell BladeRunner sent to me by Rockwell. It cut through the wood like butter and was really comfortable to use right on the dinner table where I do most of my crafting. I think I see more projects involving wood cutting in my future!)

rockwell_bladerunner

3. Lightly sand the rough edges on each piece if necessary. Set aside. (Optional: You can paint the blocks of wood any color you like and allow to dry. I chose to leave mine natural.)

4. Print whichever images you wish to use on your ornaments on card stock. (Card stock is sturdier than regular copy/printer paper and will hold up to glue better.) Make sure that your images are small enough to fit on the face of the wood block. I kept mine around 1 ½ x 2 inches. I found Microsoft Word useful for this. I scanned the images into my computer and then opened them in Microsoft Word which has a built-in ruler across the top of the document.

5. Cut out the images with scissors.

6. Using a small paintbrush, brush glue on the back of each image, (working on one image/ornament at a time.) Position the image in the center of the block of wood and push down to adhere. Place a heavy book or other flat heavy object on top of the ornament for a minute to help the image to dry flat and adhere well. (Optional: If using specialty decoupage craft glue which advertises that it can be used for “sealing” as well as adhering, feel free to paint over top of the image to give it a finished glossy look and allow the ornament to air dry without any heavy object placed on top. Painting over top the image is not advised if using Elmer’s Glue-All.)

7. Once dry, twist a screw eye into the top side of each ornament. If your fingers become tired, needle-nose pliers will help you screw them into the wood. Tip: Sometimes a careful little tap with a hammer will help get the screw eyes securely into the wood before you attempt to turn/screw them in.

8. Cut the string, (I used white mason line because I like the simplicity of it, but you can use any color or type of string you like), into pieces about 4 inches long. (You will need 24 of them.)

9. Put each piece of string through the screw eye on each ornament and tie in a knot.

10. Your ornaments are ready to hang on your tree! Feliz Navidad!

TracyLopez_Latinaish_LoteriaOrnaments2

TracyLopez_Latinaish_LoteriaOrnaments3

Want more creative ideas?

Winter Badge '13 280x200

 

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

Feliz Thanksgiving!

teagradezco

Hola! I’m sure all of you will soon be busy cooking, eating, and spending time with your familia if you aren’t already, but I wanted to give you these printables I made to keep the niños busy while the chumpe (pavo!) is in the oven.

Have the kids fill out these little notes of thankfulness to practice their Spanish and express their gratitude for loved ones, then cut them out and give them to family!

Instructions:

1. Choose the thankful notes you would like to use – (Either “te agradezco” or “le agradezco” depending on the intended recipient.)

2. Click on the image below to be taken to the download page.

3. Download by clicking “Download” on the top right hand side where you see the blue arrow. Open the PDF in Adobe Reader then click “print.”

Have fun and Feliz Thanksgiving!

Click here to go download!

Click here to go download!

Click here to go download!

Click here to go download!

Bohemian Shakira-style Brass Washer Bracelet

bracelet_latinaish_604

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

I don’t know why, but whenever I see an armful of pretty bohemian-style bracelets I think of Colombian singer, Shakira, and she’s the inspiration for this bracelet made of simple yet surprisingly elegant-looking materials. Cotton string and brass washers are re-imagined into a piece of jewelry that will be sure to attract attention and compliments. With the holidays soon upon us, this is an idea you may want to add to your list of crafts to try. It’s affordable and quick to make, plus your favorite amiga, hermana, sobrina or prima will be sure to love it.

Bohemian Shakira-style Brass Washer Bracelet

What you need:

10 to 20 flat brass washers (small #8S, Blue Hawk/HILLMAN)
string (Blue Hawk twisted cotton twine)
scissors
sticky tape

Directions:

1. Cut 4 pieces of twine to 4 feet long.
2. Tie the pieces together at the top leaving about 4 inches above the knot. (See photo below.)
3. Tape the knot to a surface to secure in place.
4. Tie string #1 around strings #2 and #3 in this way: String #1 goes OVER strings #2 and #3 then comes back UNDER strings #2 and #3, then over itself.) Pull gently so the loop moves up and tightens at the top. (See photo below.)
5. Tie string #4 around strings #2 and #3 in the same way as described in step 4. (Note that strings #2 and #3 always remain together in the middle.) Repeat step 4 and step 5 about five to six times.
6. Slide a washer onto string #1 or #4 (alternate) before tying around strings #2 and #3. Repeat step 4 and 5 before adding another washer. Keep repeating steps 4, 5, and 6 until bracelet is long enough to tie around your wrist.
7. Tie the bracelet off the same way you tied the strings together at the top in step 2.
8. Cut off any undesired excess string.
9. Bracelet is worn tied around the wrist, (I double knot it to keep it from falling off.)

The supplies

The supplies

The method.

The method.

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.

How to Make a Día de los Muertos Nicho

Do-it-Yourself Frida Kahlo Nicho

As a member of Lowe’s Creative Ideas Network I received gift cards from Lowe’s in order to purchase supplies to complete projects. All opinions are my own.

October is my favorite time of year, not just because it’s autumn, (which is my favorite season), but because this is the time of year when all kinds of creative Día de los Muertos (Day of the Dead) crafts and products start to pop up all over the place in preparation for the November holiday.

For Día de los Muertos, many people in Latin America create an ofrenda, or altar, to honor their deceased loved ones, so I knew I wanted to create something along those lines.

While walking around Lowe’s to brainstorm ideas, I walked past the wood moulding and noticed how the crown corners looked like little houses when turned the wrong way and this reminded me of the nichos I used to make. Nichos are a beautiful Latin American folk art which incorporate mixed media in the style of a shadow box and often serve as a religious altar. Because I already keep photos of our deceased loved ones on a permanent altar of sorts, I decided to make a nicho to honor the iconic Mexican artist, Frida Kahlo.

How to make a Frida Kahlo nicho

mini-papel picado,  Frida Kahlo nicho

Frida Kahlo nicho for Día de los Muertos

If you want to make a Día de los Muertos nicho, follow the directions below to get started now!

Día de los Muertos Nicho

You need:

1 large crown corner (wood moulding)
wood glue
3/8 x 4 x 24 inch pine craft board
3/4 in. x 1 in. brass hinges
2 cabinet knobs
craft paints and brushes
hand saw
small hammer
1/16 drill bit
3/16 drill bit
drill
miniature screwdrivers
measuring tape
pencil
safety glasses
sandpaper
decorations of your choosing
small photo of deceased person you’re honoring
battery operated candles

Directions:

1. Remove stickers from the wood. Lightly sand to remove stickiness if needed.

2. Carefully knock out triangular corner supports inside the corner crown.

Frida Kahlo nicho how-to

3. Sand the corner crown to remove glue and rough edges.

4. Cut the craft board so you have two 7 1/2 inch pieces. The third piece set aside for another project.

nicho_howto2

5. One 7 1/2 inch piece will be the bottom of the nicho. The other 7 1/2 inch piece should be cut into two equal pieces measuring 3 3/4 inch – These will be the doors of the nicho. Sand these pieces.

6. Measure and pre-drill holes on doors and sides of nicho for the tiny screws that came with the hinges. (I pre-drilled these with a 1/16 bit and used my Rockwell 3RILL, which is my new favorite tool. Full disclosure: Rockwell gave the drill to me to use on my Lowe’s projects.)

Also drill holes to attach the cabinet knobs – I used a 3/16 drill bit for those.

rockwell_3rill

7. Paint pieces desired colors. Allow to dry. (Sand lightly for a slightly weathered look.)

8. Screw the knobs on the doors through the 3/16 holes you drilled. (Depending on the knobs you bought, you may prefer to find shorter bolts than the ones that came with the knob due to the width of the wood.)

nicho_howto3

9. Use a mini-screwdriver to attach the hinges to doors and then doors to nicho where you have pre-drilled holes.

10. Use wood glue to attach the bottom piece to the bottom of the nicho. Allow to dry.

11. Place photo, battery operated candles (real candles absolutely not advised!) and other decorations inside. Display on a shelf or attach a picture hanger to the back for wall display.

Do-it-Yourself Frida Kahlo Nicho

Check out more from Lowe’s Creative Ideas Network by subscribing to their Creative Ideas Magazine and E-Newsletter, following them on Pinterest, and by seeing what the other Lowe’s Creative Ideas Network members are up to.